|
High Pressure Suspension Grinder is suitable
for grinding the barite, limestone, kaollnite, ceram
and slags, etc. which below scale 9.3 of Moth and
below 6% shadness and 280-odd sorts of non-inflammable
and non-explosive stuff in the trades of mining,
metallurgy, chemical engineering and building material
for high fine powder generating and processing .
The Product size is adjustable in the range of 80-425
mesh. It is possible to produce 30-80 mesh coarse
powder through special device in the machine.
Features:
1, Having higher capacity of 20-30% relatively to
Raymond mill, and Higher grinding force of rollers
to stuffs because of high pressure springs.( notes
for 5R4121: compared to 5R4119 raymond mill, at
the same motor powder, capacity is improved to 10%,
and Higher grinding force of rollers to stuffs because
of high pressure springs.)
2,It can process the mineral stuffs of Moh¡¯s hardness
below 9.3 grade.
3,The final products have a wide range, max. powders
are up to 0.95mm(20mesh), mini ones are 0.038mm(400mesh).
4, little pollution and dust collector efficiency
is to national limitation.
Working process:
Working
process: large stuffs are delivered to bunker by
elevator after crushed, then to chamber by electric
feeder. In mainframe, shovels scoop up stuffs into
the parts between rollers and ring, the processed
powders are blowed up to analytical engine with
wind entering chamber by blower, part of powders
which can not be up the demand fineness will fall
back to be grinded, left(that is final product)
with airflow enter concentrator and divided with
air then discharged from discharge vavle. Air returns
to blower and circles, flowing in minus state.
specification
of High Pressure Suspension Grinder:
|
