You are here: Home  >  Product Center  >  Product List  >  VSI Crusher (Sand Making Machine)

VSI Crusher (Sand Making Machine)

The unique hydraulic open top system can make it convenient and quick to remove upper cover Even one person can also easily accomplish it,and thus shortening the maintenance downtime. Simple hoisting device can make it convenient for users to lift rotor and bearing housing assembly.make maintenance more conveient,at same time saved the cost and time of maintenance.

Raw Materials:

Limestone, calcite, coal ash, kaolin, calcium carbonate, gangue, gypsum, grain slag, superfine slag powder, coal dust, bentonite, barite, marble, talc, refractory material

Application:

Cement, silicate product, new building materials, refractory material, chemical fertilizer, nonferrous and ferrous metal beneficiation and glass ceramic industries.

Introduction

The unique hydraulic open top system can make it convenient and quick to remove upper cover Even one person can also easily accomplish it,and thus shortening the maintenance downtime.

Simple hoisting device can make it convenient for users to lift rotor and bearing housing assembly.make maintenance more conveient,at same time saved the cost and time of maintenance. The unique thin oil lubrication system can adjust automatically the supply of lubricating oil according to the field usage of machine.

And this can greatly save the labor time and make the machine keep the best working condition.The key parts of the machine adopt high quality alloy material, and are equipped with the bearings of world famous manufacturers.
product introduction

Product Advantages

  • 01

    High Seal Of Observe Door

    • Components of observation door adotps rubber sealing devices makes the seal more reliable.
  • 02

    The New Design Of Rotor

    • AssemblyCompletely new combined rotors design which improves production effectively and decreases abrasion.
  • 03

    New Added Bulk Tray

    • Feeding place of VSI600 new type sand maker is equipped with a bulk material plate can be adjustable angle and install according to feed belt location to make the material can evenly scattered in the feed chamber.
  • 04

    New Added Feed Flow Control Device

    • At the bottom of feed cavity equips with a movable flow control deviceby adjusting the feed screw outside the cavity to achieve the purpose of adjusting feeding hole size.

Product Specification


Model VSI7611 VSI8518 VSI9526 VSI1140
Capacity
(t/h)
cascade and feeding 120~180 200~260 300~380 450~520
Fully central feeding 60~90 100~130 150~190 220~260
Max. feeding 
size(mm)
Soft material
< 35 < 40 < 45 < 50
Hard material
< 30 < 35 < 40 < 45
Rotation speed(r/min) 1700~1890 1520~1690 1360~1510 1180~1310
Double motor power(kw) 110 180 264 400
Dimensions LxWxH(mm)
3700×2150×2100 4140×2280×2425 4560×2447×2778
5000×2700×3300
 Weight(t)
11.8 14.5 17.8 25.6
Power supply 380V,50Hz
Vibration sensing Monitoring range: 0.1- 20mm/s continuously adjustable
Thin oil 
lubrication 
station
Double oil oumps motor’s power(KW) 2×0.25
Safty Assurance
Dual oil pump system stabilize oil supply;switch-off automatically without oil flow or oil 
pressure;air cooling system /water cooling system available;preheating-start engine adopted.
Dimensions LxWxH 850×520×1270(mm)
Power of Oil Tank Heater(KW) 2

 Note: The production capacity is measured by medium-hardness limestone and is also affected by factors such as the particle size water content and material properties. 

Related Products

INQUIRY

Please fill in your requirements for more information and quotation.
You will get a reply within 24 hours. Thanks.
*
*

SUBMIT