You are here: Home  >  Product Center  >  Product List  >  5X Sand Making Machine

5X Sand Making Machine

The new series of 5X sand making machine set three kinds of crushing patterns .5X sand making equipment is widely used in a variety of metals and non-metallic minerals cement refractories abrasives glass raw materials construction aggregate sand mechanism metallurgy and other industries.

Raw Materials:

Limestone, calcite, coal ash, kaolin, calcium carbonate, gangue, gypsum, grain slag, superfine slag powder, coal dust, bentonite, barite, marble, talc, refractory material

Application:

Cement, silicate product, new building materials, refractory material, chemical fertilizer, nonferrous and ferrous metal beneficiation and glass ceramic industries.

Introduction

The new series of 5X sand making machine set three kinds of crushing patterns in one, which is the core equipment in construction, mining, metallurgy industry, highways, railways, bridges, hydropower, mineral grinding areas and mechanism sand industry.

5X sand making equipment(centrifugal impact crusher) is widely used in a variety of metals and non-metallic minerals, cement, refractories, abrasives, glass raw materials, construction aggregate, sand mechanism, metallurgy and other industries.

The sand maker is uitable for crushing various mid-hard ores and rocks, such as iron ore, nonferrous metal ores, silicon carbide, bauxite, quartz sand, corundum, perlite, basalt and other types of high hardness materials.
product introduction

Product Advantages

  • 01

    Motor assembly

    • Standard high-performance vertical motor. Configure well-known brand engine stable performance quality assurance.
  • 02

    Alloy wear resistant block

    • Alloy wear-resistant block adoptes highly wear resistant and high temperature resistant materials in important U.S. industries and thus has a longer service life.
  • 03

    The New Impeller Design

    • Optimize material flow increase production by 30%. The crushed material is perfect in shape and does not require secondary shaping.
  • 04

    Feed Inlet Points Trays Design

    • Height can be adjusted to control the feed volume and different proportion of materials that are vertically into the impeller and scattered around of the impeller to adjust the particle size ratio.

Product Specification

Model 5X7615 5X8522 5X9532 5X1145
Capacity(t/h) Central feeding with circular cascade feeding 150-280 240-380 350-540 500-640
Fully central feeding 70-140 120-200 180-280 250-360
Max feeding size(mm) Soft material < 35 < 40 < 45 < 50
Hard material < 30 < 35 < 40 < 45
Rotation speed(r/min) 1700-1900 1500-1700 1300-1510 1100-1310
Double motor power(KW) 110-150 180-220 260-320 400-440
Overall dimension L×W×H(mm) 4100×2330×2300 4140×2500×2700 4560×2600×2900 5100×2790×3320
Weight(t) 12.1 14.8 18.6 27.5
Power 380V50Hz
Thin oil lubrication station 6
Double oil oumps motor's power(KW) 2×0.31
Safty Assurance Double oil pumps assure enough oil supply; Switch off automatically without oil flow or oil pressure. Lower the temperature with cool water in summer raise the temperature with motor in winter.
Overall dimension L×W×H (mm) 820×520×1270
Power of oil Tank Heater(kw) 2

Related Products

INQUIRY

Please fill in your requirements for more information and quotation.
You will get a reply within 24 hours. Thanks.
*
*

SUBMIT