You are here: Home  >  Product Center  >  Product List  >  Raymond mill

Raymond mill

Vipeak Group has 20-year-experience of Raymond roller mill manufacturing and development. Raymond mill can process barite, calcite, potash feldspar, talc, marble, limestone, ceramics, glass and other non flammable materials, the rollers mill is used in mining industry, chemical engineering, construction material and metallurgy industry over 280 kinds material process.

Raw Materials:

Limestone, calcite, coal ash, kaolin, calcium carbonate, gangue, gypsum, grain slag, superfine slag powder, coal dust, bentonite, barite, marble, talc, refractory material

Application:

Cement, silicate product, new building materials, refractory material, chemical fertilizer, nonferrous and ferrous metal beneficiation and glass ceramic industries.

Introduction

Vipeak Group has 20-year-experience of Raymond roller mill manufacturing and development. Raymond mill can process barite, calcite, potash feldspar, talc, marble, limestone, ceramics, glass and other non flammable materials, the rollers mill is used in mining industry, chemical engineering, construction material and metallurgy industry over 280 kinds material process.

After being crushed to requested size, material will be taken to storage hopper by elevator, then vibrating feeder will convey material evenly and continuously to main machine grinding chamber, under the force of centrifugal, grinding roller swing outward and press on grinding ring, shovel blade scoops material up to gap between roll and ring, grinding roller rolls to grind material.

After being grinded, fine powder will be taken to classifier to be classified, coarse material will fall down to be reground, standard fine powder will go to finished product cyclone collector and discharged by discharge powder tube.
product introduction

Product Advantages

  • 01

    Independent Production System

    • Independent production system can process material from bulk material to powder.
  • 02

    High Quality Wear-resisting Material

    • Major parts of Raymond mill adopts quality steel, wear-resistant parts adopts high quality wear-resisting material, good wear-resisting property of complete machine, stable operation.
  • 03

    Uniform Fineness, Sieving Rate 99%

    • Even final product size, sieving rate could reach 99%, incomparable performance.
  • 04

    Main Machine Transmission

    • Sealed gear case and belt wheel, smooth transmission, reliable performance.

Product Specification

For non-metallic mining industry:
Model
LM1300K LM1500K LM1700K LM1900K LM2200K LM2400K LM2800K LM3400K LM3700K
Capacity (t/h) 10-40 13-50 18-70 23-85 36-135 41-164 50-196 70-260 90-320
Output fineness μm  170- 33 170- 33 170- 33 170- 33 170- 33 170- 33 170- 33 170- 33 170- 33
mesh 80- 425 80- 425 80- 425 80- 425 80- 425 80- 425 80- 425 80- 425 80- 425
Product moisture ≤1% ≤1% ≤1% ≤1% ≤1% ≤1% ≤1% ≤1% ≤1%
Max feeding size (mm) <38 <40 <42 <45 <50 <55 <58 <62 <65
Best input moistrure <4% <4% <4% <4% <4% <4% <4% <4% <4%
Input moistrure(drying required) <15% <15% <15% <15% <15% <15% <15% <15% <15%
Inlet air temperature (℃)  <350 <350 <350 <350 <350 <350 <350 <350 <350
Outlet air temperature (℃) 70-95 70-95 70-95 70-95 70-95 70-95 70-95 70-95 70-95
Power (KW) 200 280 400 500 800 900 1120 1800 2240


For other industries:
Models LM800M LM1150 LM1300 LM1500 LM1700 LM1900 LM2200 LM2400 LM2800
Max feeding size (mm) <20 <20 <38 <40 <42 <45 <50 <50 <50
Best input moistrure
<15%
Fineness
R0.08=5-20%(200mesh,80- 95%passing)
Coal powder moisture ≤1%- 5%
Inlet air temperature (℃)  <350
Outlet air temperature (℃)
<350
HGI >55
Capacity (t/h) 4-6 7-10 10-17 16-22 20-30 26-40 35-50 45-60 65-100
Power (KW)
45-75 90-110 185-220 220-280 280-355 355-450 450-560 500-630 900-1120


 LM type slag vertical mill:
Model LM17-2N LM19-2N LM21-2N LM24-2N LM28-2N LM35-2N LM46-2N
Capacity (t/h) 7-11 9-13 11-15 14-20 22-26 48-55 90-100
Moisture of slag
<12%
Product blaine
≥420 m2 /kg
Product moisture ≤1%
Power (KW)
200 280 400 500 800 1120 2240

Related Products

INQUIRY

Please fill in your requirements for more information and quotation.
You will get a reply within 24 hours. Thanks.

SUBMIT