You are here: Home  >  Product Center  >  Product List  >  HGM Series Micro Powder Mill

HGM Series Micro Powder Mill

HGM Series Three-rings (Four-rings) Micro-Powder Grinder Mill is a new type of high efficient fine powder and ultrafine powder processing equipment .This type grinding mill is mainly suitable for grinding non-flammable and non-explosive brittle materials with low and middle hardness (mohs hardness < 6) and moisture content less than 5% and it is currently the best choice for super fine crushing.

Raw Materials:

Limestone, calcite, coal ash, kaolin, calcium carbonate, gangue, gypsum, grain slag, superfine slag powder, coal dust, bentonite, barite, marble, talc, refractory material

Application:

Cement, silicate product, new building materials, refractory material, chemical fertilizer, nonferrous and ferrous metal beneficiation and glass ceramic industries.

Introduction

HGM Series Three-rings (Four-rings) Micro-Powder Grinder Mill is a new type of high efficient fine powder and ultrafine powder processing equipment, which is by our technology research and development center through introducing advanced foreign technology and develops for years of concentrated innovation research and design transformation.

This type grinding mill is mainly suitable for grinding non-flammable and non-explosive brittle materials with low and middle hardness (mohs hardness < 6) and moisture content less than 5%, such as calcite, chalk, limestone, kaolin, talc, mica, bentonite, magnesite, illite and pyrophyllite, vermiculite, sepiolite, attapulgite, rectorite, diatomite, barite, gypsum, alum stone, graphite, fluorite, phosphate rock, potassium ore, pumice, etc., and it is currently the best choice for super fine crushing of the non-metallic mineral.
product introduction

Product Advantages

  • 01

    High Efficiency and Low Consumption

    • Under the condition of same material power and final product size its capacity is higher than jet mill and stirred mill by 40%.
  • 02

    Long Service Life

    • Service life could be 1 year. Service life is longer than wear-out part’s of impact crusher and turbine crusher if material and product size are same.
  • 03

    Superfine Powder Process

    • No antifriction bearing and bolt inside the grinding cavity no bearing or sealing element or bolt falling out and damaging machinery situation.
  • 04

    Safety Operating

    • No antifriction bearing and bolt inside the grinding cavity no bearing or sealing element or bolt falling out and damaging machinery situation.

Product Specification

 

Model HGM80 HGM100 HGM125 HGM168
No.of Roller 
and Ring
No.of Roller (Pcs) 21 28 40-44 30-40
No.of Ring (Pcs) 3 4 4 4
The Feeding Size(mm)
≤20
Capacity(Kg/h) 500-5000 1000-8500 1500-12000 5000-25000
The Final Size
Micron
45-3
Mesh 3250-325
Motor Power
(KW)
Main Mill
55 110 160 315
Classifier 18.5 37 45 18.5x5
Air Blower 45 75 2x55 90x2
Screw Conveyer 3 3 2-4 2
Discharge Valve 2x0.75 2x0.75x1.1 4x1.1 1.5x20.75x2
Air Compressor 7.5 15 2x15 55
Overall Dimension
(Length*Width*Height)(M)
13.9x4x6.2 18x4.6x8.6 14x9x10.25 26.3x7.5x11.9

Related Products

INQUIRY

Please fill in your requirements for more information and quotation.
You will get a reply within 24 hours. Thanks.
*
*

SUBMIT